Core feature ‌



Youdaoplaceholder0 interface design ‌



Youdaoplaceholder0 national standard two-pin connector ‌ : standard two-flat plug (without round hole grounding), conforming to GB 1002 standard.



The end of the ‌ eight characters ‌ : universal C7 interface (8 shape), suitable for printers, audio equipment, desk lamps, monitors and other devices.



Youdaoplaceholder0 electrical parameters ‌



Youdaoplaceholder0 Rated value ‌ : voltage 250V, current 5A-10A, core cross-section is mostly 0.5mm² or 0.75mm² (copper core).



Youdaoplaceholder0 Certification requirements ‌ : It is mandatory to obtain 3C certification (China Compulsory Product Certification).

Youdaoplaceholder0 Materials and workmanship ‌
The conductor is made of pure copper or copper-clad aluminum, with a PVC insulating layer on the outside. Some parts support flame retardancy and high-temperature resistance (90℃).

Optional straight head or 90° elbow design, suitable for different equipment Spaces
Common application scenarios ‌

Youdaoplaceholder0 household appliances ‌ : desk lamps, electric fans, humidifiers and other low-power devices

Youdaoplaceholder0 Office equipment ‌ : power connection for printers, audio equipment and monitors

Youdaoplaceholder0 Travel adapter ‌ : Some designs are compatible with international sockets (such as when paired with adapter plugs)

Key Points of the update to the new national standard (effective from August 2025) ‌

Youdaoplaceholder0 Security upgrade ‌
The plug is forcibly equipped with an insulating sheath to cover the root of the metal pin (to prevent electric shock).

Prohibit the axial rotation structure of the pin to enhance stability

Youdaoplaceholder0 outdoor special category ‌

New electric bicycle charging socket (IPX4 waterproof + overcharge protection)

New electric vehicle discharge socket (shockproof and pressure-resistant design

Youdaoplaceholder0 purchase suggestions ‌

Youdaoplaceholder0 verify qualifications ‌

Check the 3C certification mark and test report (brands such as Bull and Schneider have higher compliance)

Give priority to pure copper wire cores (with better electrical conductivity than copper-clad aluminum)

Youdaoplaceholder0 parameter matches ‌

The length (1m/1.5m/2m) and elbow/straight head are selected according to the equipment requirements

For outdoor use, products with IP protection level should be selected

Youdaoplaceholder0 precautions ‌

Avoid using uncertified products. Inferior wires can easily cause overheating risks.

After the implementation of the new national standard (August 2025), products that comply with the old standard will gradually be phased out of the market. It is recommended to give priority to purchasing models that conform to GB 1002-2024 and GB 2099.7-2024